Do you need to charge your Arlo’s battery? Home security cameras manufactured by Arlo have easy-to-recharge batteries. It doesn’t matter which Arlo camera setup you have; we’ll show you how to charge the Arlo camera battery.

You can use your Arlo camera for surveillance for up to 6 months on a single charge. One of the best features of these batteries is that they are rechargeable. But you need to know how to charge Arlo camera’s battery and make them retain their life for a long time.

This blog will give you step-by-step instructions on how to charge Arlo camera battery. You will also find information on checking the battery levels and fixing issues like an Arlo camera that won’t charge.

The process is simpler than it appears. Make sure that you have the charging kit that came with the device, or buy a replacement if yours isn’t working. This is how to charge the Arlo camera battery.

You Need To Know: ◙ The easiest way to charge an Arlo camera battery is to connect the camera to an outlet using a Arlo USB adapter. ◙ Using an Arlo charging station, you can charge multiple batteries at once. ◙ If the Arlo camera battery doesn’t charge, make sure the connections are clean and aren’t damaged.

How do you know your Arlo camera needs charging?

You can check the battery level of your Arlo camera on the Arlo App to see if it needs to be charged. You can check the status of the camera by launching the Arlo app. A message will appear next to the camera’s name that needs charging. Make sure you identify the correct camera. This can be made simple by naming your camera based on its location. You can also access the camera’s Settings page to get accurate battery information.

How to charge Arlo camera battery?

The USB charging cable that comes with the camera packaging can be used to charge Arlo cameras. The solar charger can also be used if you use your camera outdoors. It is also possible to charge the Arlo camera two batteries simultaneously with an Arlo Dual Charging Station.

Here are some simple steps on how to charge Arlo’s camera:

Unmount Your Arlo Camera:

The first thing you need to do before charging the Arlo camera is unmount it and move it indoors if you use it outside. Even if there is a power outlet outside, don’t charge your Arlo battery outside. To charge Arlo camera, you need to bring it inside before plugging it in to charge.

• You should charge your camera in a location where it won’t be disturbed or stepped on. The best place to do this is on a countertop or table. The camera shouldn’t be charged on the floor unless it’s in an out-of-the-way location.
• The Arlo Essential, Pro, XL, and the camera that comes with the Arlo Security Light can all be charged with this method.

Connect The Arlo Camera To Charging Cable: 

You need to Plug the USB charging cable into the Arlo camera and wall power adapter to charge Arlo camera. The charging cable has 2 sides. The smaller side plugs into the camera’s back. Find the plug slot by flipping the camera over. Then, plug the larger side of the charging cable into the wall adapter.

• Use only Arlo products to charge the battery. Other power units and cables might not work and could damage the camera.

Plug The Adapter Into Power Outlet:

Now, you need to Plug the power adapter into a wall socket to charge Arlo camera. The camera’s LED light blinks three times blue when the battery is correctly connected. To check if your battery is charging, look for this blinking.

• While the camera charges, turn it around or cover it with a towel if the blinking annoys you.
• Check your connection if the light doesn’t blink. Ensure that all the plugs are fully inserted.
• If you missed the blinking indicator, look for a charging icon next to your battery in the Arlo app on your phone or tablet.

Unplug The Camera:

You should unplug the camera when the LED light turns solid blue. The battery is full when the light is solid blue. Lastly, re-install the Arlo camera in its original location.

• In most cases, Arlo camera batteries require 2-4 hours to charge, depending on their condition. If you unplug the battery before the light turns solid, the battery will not fully charge.

How To Charge Arlo Camera Using Charging Station:

The Arlo camera charging station includes a USB cable and a wall adapter. The smaller end of the cable should be plugged into the charging station, while the larger end should be plugged into the adapter. Now, you need to plug the wall adapter into the Working power outlet to charge the Arlo camera. Here are a few simple steps to charge Arlo camera using the Charging station.

Plug The Arlo Charging Station:

To charge Arlo camera battery, connect the Arlo charging station. A USB cable and a wall adapter are included with the charging station. Connect the small end of the cable to the charging station and the large end to the adapter. Connect the wall adapter to an outlet.

• Arlo charging stations are sold separately from cameras and base stations. You can purchase this from an electronics store or online. It is important to remember that the power station does not include batteries. Only a charging port, cable, and wall power adapter are included.
• Ensure that the power station is in a safe place where it won’t be knocked over or stepped on.
• Use only Arlo products to charge the power station. It won’t work with any other USB cable.

Open The Arlo Camera Battery Compartment:

To charge Arlo camera battery, open the Arlo camera’s battery compartment. On the top of the camera, you’ll find a small latch. The battery compartment can be unlocked by pressing the latch down with your finger. Using your other hand, lift up the top part of the camera and reveal the battery while holding the latch.

• When opening the compartment, hold onto the camera firmly. There is a possibility that it could slip out of your hands and break.

Remove Arlo Camera Battery:

Slide the battery out by pressing down the latch. A small latch holds the battery in place. Slide the battery out of the compartment after pressing it down to release it.

Charge The Arlo Camera Battery:

The battery should be inserted into the charging bay until it clicks. The power station has two charging bays, one on each side. Take the Arlo camera battery and line it up with the grooves on the charger. The black part of its back should be inserted into the bay. You will hear a click once the battery is locked in place.

• Check that the Arlo symbol on the battery is facing up. That’s how you know the battery is facing the right way.
• If you want to charge two batteries simultaneously, insert another battery on the other side.

Wait until the Battery is Fully Charged:

Leave the battery in the charging station until the LED light turns solid green. A solid yellow LED light indicates that the battery is charging. You can remove the battery once it turns solid green.

• There is a light for each battery in the power station. To make sure you’re checking the right light, look at the one closest to the battery.
• Depending on how low the charge is, it will take 2-4 hours for the battery to charge.
• If the LED blinks yellow, the Arlo camera battery is inserted but not charging. If the grooves are not appropriately aligned, try removing and reinserting the battery.

Remove The Battery:

Remove the Arlo camera battery by pressing it until it clicks. The click means the Arlo camera battery is free. Then, slide out the battery carefully and insert it back into the camera.

• Be careful when you remove the battery from the power station. There is a possibility that it will fall out and break.

Why is My Arlo camera not charging?

If your Arlo camera is not charging, you can always follow these simple steps to resolve the issue:

• Ensure that the power adapter cable is fully inserted into the power adapter port.
• You should ensure your camera’s USB port is sealed tightly before placing it outdoors.
• You can try removing the camera’s battery and power adapter cable and re-installing them.
• The cable is not correctly inserted in the camera.
• Your Arlo camera battery is damaged.

You should insert the battery into the charging station within two minutes after plugging it in. Wait for a few seconds before connecting and plugging the adapter in again if you miss the window. You can reset Arlo camera if the problem is not solved or you are facing some other issues.

Conclusion:

It is easy to charge the Arlo camera battery using the included charging station and power adapter. Now, you are able to charge the Arlo camera battery easily by reading this guide on how to charge Arlo camera. The battery can provide reliable performance for your Arlo cameras if you use it properly and care for it. For further information, contact Arlo Customer Support.

FAQs:

• How Do I Know When My Arlo Battery Is Charged?

If you want to check if the battery is fully charged, you can use the Arlo app on your phone or the Arlo website interface. The adapter will emit a solid blue light when the battery is fully charged.

• How Long Does It Take to Charge an Arlo Pro Cam Battery?

Your battery’s charge level depends on how empty it is. An Arlo app or website interface will show you how much charge is left. It takes about two hours to charge a completely flat battery fully.

• How Often Do Arlo Batteries Need To Be Recharged?

The batteries in an Arlo Go camera should last two to three months if used for five minutes a day. A Pro or Wire-free Arlo camera with 5 minutes of daily recording will last four to six months.